Successful cases of silicon rubber industry
Rubber secondary vulcanization push-type oven
ⅠMain technical parameters of the oven of the rubber secondary vulcanization push model
1、Inner size：W750*H1820*D2130mm；
2、Dimension（around）：W1290*H2300*D2330mm；
3、Temperature range: normal temperature ~ ' 250 ℃ adjustable;
4、temperature fluctuation degree：≤±1℃；
5、Temperature uniformity：≤±5℃(NO Load)；
6、Heating rate：≤8℃/min；
7、The shell temperature: no more than the environment temperature 15 ℃ ', except the door around;
8、Circulating air mode: a large number of forced air circulation in horizontal circulation;
9、Power supply：380V，50HZ/Three-phase five-wire system，380V，50HZ；
10、Power：56KW
Ⅱ Structural features of the oven Chamber of the rubber secondary vulcanization push model
1. Shell material: it is made of 2mm thick Q235 cold-rolled steel sheet (with best strength, plasticity and welding comprehensive performance), which is bent and welded. 2、Inner tank material: 1.5mm SUS304 stainless steel plate is adopted to keep the inner tank clean, free from dust, rust and corrosion, easy to clean.
3、Sealing material, sealing strip of imported ￠25 mm high temperature ceramic fiber packing production, door adopt double seal form and tank,strengthens the sealing effect, make the door close around the joint seam, not leak the heat.
Ⅲ Three、Environmental conditions of the oven of the rubber secondary vulcanization push model
1、The environment temperature：-5℃-40℃；
2、Relative humidity：≤85%RH；
3、Power supply：AC380V±10%，50Hz；
Ⅳ Oven training of rubber secondary vulcanization push model
Free technical training
