ⅠMain technical parameters of tunnel oven drying line in capacitor industry
1、The tank size：L6100*H180*W680mm（materialSUS304,The bright side faces the conveyor） 2、Dimension（around）：1．L6100mm*H1880mm*W1340mm，The height from the ground to the conveying plane is 850 ' / 30mm (huake provides the conveyor design drawing, and the supplier provides the fixing parts in the Chamber
3、Temperature range：indoor'10℃～300℃；
4、Temperature fluctuation：±1℃；
5、Temperature uniformity：±5℃(Under constant temperature, no load test),(The temperature measuring point is on the conveying surface)
6、Heating rate：Rise from room temperature to working temperature within 15 minutes
7、The shell temperature：'15℃，No more than the environment temperature ' 15 ℃, juncture place around
8、Hot air circulation mode：Top air outlet, bottom side air return (wind speed 0.8m/s), wind set and heating module to be quickly replaced and repaired
9、Power supply：380V，50HZ/Three-phase five-wire system，380V，50HZ；
10、Power：42KW
ⅡStructure characteristics of tunnel stoving line furnace in capacitor industry
1、The shell material：Bending by 2.0mm cold plate, phosphating surface, high temperature electrostatic spraying treatment, corrosion resistant and easy to clean
2、Surface treatment：Surface sanding, polishing, phosphating (can increase corrosion resistance of metal, adhesion of paint) treatment.High temperature spray (large corrugated) to prevent rust and corrosion.The color is "computer white".Color plate offered by huaco
3、Made of 1.5mm thick stainless steel (material SUS304);Keep the inner tank clean and free of dust, prevent rust and corrosion;The inner sheet metal and insulation layer are fully welded to prevent leakage of insulation cotton to ensure cleanliness.
4、Sealing material: the sealing strip is made of high-temperature resistant silica gel, which can withstand temperature without deformation.
Ⅲ Tunnel drying line control system of capacitor industry
1. Air motor: the feeding section is equipped with a 1.5kw dongyuan air motor, and the second section is equipped with a 1.5kw high-temperature resistant dongyuan air motor group.
2. Air conveyer: each equipped with a 10.5-inch stainless steel air conveyer.
3. Heating pipe: adopt u-type heating pipe of SUS304 stainless steel made in Taiwan, with radiator fin, which can make the temperature of heating pipe evenly distributed;
4. Control of heating tube: high power SCR of Taiwan is used to control the output power of the heating tube in each section. When the heating current is close to a constant temperature, the heating current decreases, making it a constant temperature;
5、Temperature sensor: omron 3-meter standard, k-type thermocouple;
6. Others: schneider and omron brands are used in all control appliances;
Ⅳ Environmental conditions of tunnel oven drying line in capacitor industry
1、Environmental temperature：-10℃～～'45℃；
2、Relative humidity：85%RH；
3. Air source: air pressure: 4 ~ 7Bar;
4、Power supply：AC380V±10%，50Hz；
Ⅴ Tunnel oven drying line training for capacitor industry
Free technical training
