Your Location:Home > Customer Case

Successful cases in wind power, electric motors and transformer industries

Electric motor industry drying room

Ⅰ Main technical parameters of big oven in motor industry

1、Inner tank size: W4500* H3500* D 6000mm (divided into two sections for front and back, D3000mm for single section);
2、External dimension: W5200* H6000(The total height of the door in 8700mm including intermediate interval is 8700mm)* 7200mm in depth;
3、Temperature range: Indoor~250℃
4、Temperature fluctuation degree:≤±1℃;
5、Temperature uniformity:≤±5℃(constant temperature condition, no-load test); 6、The heating rate: ≤10℃/min(empty furnace temperature);
7、The shell temperature: the enviromental temperature should be not more than 15 ℃, except surrounding the door.
8、Circulating air mode: a large amount of forced horizontal circulation air on the two sides is greater than 2,800 cubic/hour per fan;
9、Power supply: three-phase five-wire system, 415V, 50HZ;
10、Gross Power:350KW。


Ⅱ Structural features of large oven Chamber in motor industry

1、Surface grinding, polishing and phosphating (can increase corrosion resistance of metal and adhesion of paint);High temperature spray (large corrugated) can prevent rust and corrosion.The color is "computer grey";
2、Inner material: 1.4mm SUS304 stainless steel plate is adopted to keep the inner clean, free from dust, rust and corrosion, easy to clean;
3、Trolley: the trolley is welded by no. 12 channel steel material, and has 4 directional wheels made of all-metal high-strength steel at the bottom.
The total weight can be up to 30 tons, manual in and out
4、Lighting: high temperature lighting is installed on both sides of the top of the oven in the front and rear sections to facilitate the observation of furnace conditions;

Ⅲ Control system of large oven in motor industry

1、Air transport motor: 4 sets of edeley 4KW high temperature air transport motor in Taiwan;
2、Wind wheel: equipped with 14-inch multi-wing stainless steel wind wheel;

Ⅳ Environmental conditions of large drying/curing room in the motor industry

1、Environmental temperature:-5℃-40℃;
2、Relative humidity:≤85%RH;
3、Power supply:AC380V±10%,50Hz;

Ⅴ Electric machine industry large oven room training

Free technical training